Skip to main content
Request a Quote

Assembly Hub Clothes rails & display stands

Heavy-Duty Clothes Rails assembly guide

Tool-free push-pin rails, wheels, height extensions, centre bars and card holders.

Tools
None: push-pin and push-fit
In the box
Rail frame, 4 castor wheels, instructions
Load
Up to 150 kg spread evenly
Watch the videos Ask us on WhatsApp

Your box includes printed instructions for your exact model. This guide is an overview to help you get it right first time. If anything differs, follow the printed sheet.

Videos

Videos of products this guide covers.

Step by step

  1. Lay out the parts

    Unpack on a clear floor and match every piece to the parts list in the box.

  2. Fit the wheels

    Push a bung into the end of each base leg, then push a castor into each bung until it sits fully home. The wheels are a tool-free push-fit; on the shelf model they are optional.

  3. Join the uprights to the bases

    Slide each upright onto its base until the spring push-pin clicks out through the hole. Give it a tug to check it's locked.

  4. Fit the top rail

    Push the top rail onto both uprights until the push-pins click. Stand the rail upright on its wheels.

  5. Check before loading

    Make sure every pin has clicked through, the rail stands level, and load it evenly up to 150 kg.

Adding height extension poles

  1. Lift the top rail off the uprights.
  2. Push one extension pole onto each upright (tool-free push-fit, sold in pairs).
  3. Refit the top rail to the extension poles. Add a centre bar if you want two tiers.

Adding a centre bar for two tiers

  1. Remove the top bar.
  2. Position the centre bar at the height you want.
  3. Tighten the wing nuts by hand.
  4. Refit the top bar and set the heights so tops hang over bottoms.

Fitting card holders

  1. Screw-in holders: screw into the 1/4 Whitworth fitting at the top of the rail.
  2. Clip-on holders: clip onto the rail tube (fits about 30 mm), no tools.
  3. Clamp-on holders: hand-tighten the screw clamp, slot the card in, and move it whenever prices change.

Common questions

A push-pin won't click through

Line the hole up with the pin, press the pin in with your thumb and slide the tube on until it pops out through the hole.

The rail wobbles

Check every push-pin has clicked through and that all four wheels touch the floor. Uneven floors make any rail rock.

Can I make my rail taller later?

Yes. Height extension poles push-fit onto the uprights, and a centre bar turns it into a two-tier rail.

Products this guide covers

Heavy Duty Clothes Rails · Accessories for Clothes Rails

Still stuck? We will talk you through it

Have your order number ready and tell us which product you are building. We are open Monday to Saturday, 9am to 6pm.

WhatsApp us

Quick order

Know your product codes? Type each code and quantity, or paste a list (one per line, such as SLSSR5000 10).

Your basket is empty

Start shopping
Menu